Being a dealer for the following PRODUCTS, allows me to help you get the best results from the SERVICES I perform for you. They work hand-in-hand, so please consult with me before purchasing parts elsewhere. Be assured that I’m always competitive with any other prices you might find, in a store, or on the internet, so you’re always guaranteed the best price at… Service Guitar Repair.
Pickups:
Seymour Duncan
Seymour Duncan Antiquity
DiMarzio
Lindy Fralin
Jason Lollar
L.R. Baggs
Fishman
K&K
B-Band
Electronics:
Pots
Switches
Jacks
Hardware:
Bridges
Tuning Machines
Pickguards
Knobs
Strings:
ghs
D’Addario
Discounts available on special orders of all other brands
Other:
I offer parts for Fender, Gibson, Ibanez, Music Man, etc. Please see WARRANTY page for a full list of brands.
10 Comments
Comments RSS TrackBack Identifier URI
Do you carry Fender parts?
Yes. I have the full line of Fender parts available, as well as parts that are not available in stores, such as: bodies, necks and other parts for restorations on genuine Fender guitars.
Just a quick question for you I have A PRS McCarty with P-90 . What would you charge to route the bridge pickup, so I could install a humbucker, but I would like to keep the neck a P-90.
Hi Charles, Thanks for inquiring. The price for the complete job, including the pickup install, would be $79.95. I would prefer to do the whole thing, to insure that all goes well. -=Joe
To all f you who want a quality repair on your guitar or an upgrade to new hot pickups, Joe is the guy, He has worked on almost all my guitars (12 of them) and they play and sound like a dream after he is done..i trust his work and i trust him…
Roy Parkison
lead guitar for Renegade Train
I recently bough an Agile Les Paul style guitar.
Here is the spec sheet for it. I currently have the first one below. I was wondering what you might be able to do to tweak it to make it better. I was thinking of sending it back to exchange with another model that has few different features or should I keep this and invest in a few changes. I’m mostly into the blues, classic rock feel and style of playing. Please let me know what you think. Thank you for your time.
Below $279 out the door.
Single cutaway solid Mahogany arch top body
Seymour DuncanHB-102N and HB-101B pickups with Alnico 5 magnets
Graph Tech Nut
Full body and neck binding
Set-in Maple neck with Rosewood fretboard and trapezodial inlays
22 Jumbo 2.7mm frets and a 13.7″ (350mm) radius neck for fast play
Grover Die Cast tuners
Two volume & two tone controls and a 3-way pickup selector switch help you find your sound
Stop-Bar tailpiece transfers string vibration to the body of the guitar and produces superior sustain
Made in Korea
Width of the neck at the nut: 1 5/8″; at the 22st fret: 2 3/16″
Neck Taper is 21.5 mm at the 1st fret and 23.5 mm at the 12th fret
Thickness of neck at the first fret approx 11/16″
Overall length, including the strap button: 40″; Scale length: 24.7″
Bridge pole spacing is 3″, and the Tail piece pole spacing is 3 1/4″
Width at the widest point: 13″
Body thickness 2″ at edge
Actual Weight is only 10 lbs
Here is the other model spec sheet. Below $369 out the door.
Solid mahogany (not a multi-ply!) arch top body
High quality Book-Matched Flame Canadian Maple Top (100% real wood top-not a photo top!)
Triple bound body, and headstock. Single binding on neck.
Improved Nickel plate hardware, including Nickel die-cast Grover tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18N)
Two Type V Alnico humbucker pickups for warm, tradional sound
The AL-3100 comes with improved wiring (single conductor braided 18 gauge American wire for pickups), improved pots (now higher voltage with brass shafts for reduced noise) and an improved pickup selector switch
Two volume and two tone controls, plus a three way pickup selector switch
One piece Mahogany set neck with 13.7″ (350mm) radius neck for fast play and adjustable truss rod
Ebony fretboard with 22 Jumbo frets and real Mother-Of-Pearl Trapezodial inlays
The AL-3100 features D’addario strings installed at the factory and a professionally cut Graph Tech Nut
Individually hand filed frets for professional feel and playability
Width of the neck at the nut: 1 5/8″; at the 21st fret: 2 3/16″
Neck taper/thickness at the 1st fret: 21.5 mm; at the 12th fret: 23.5mm
Overall length: 40″; Scale length: 24.7″
Body thickness: 2″ at edge; Width at the widest point: 13″
Bridge pole spacing is 3″, and the Tail piece pole spacing is 3 1/4″
Actual Weight is only 10 lbs
Hello Joe,
This is a very subjective question. The second guitar sounds like its a little fancier that the first. The electronics on them are probably about the same, so, whichever you decide on purchasing, that would be the best place to start for improvements, after you receive the guitar. I’m sure that a proper Set-Up Pkg. would be a great improvement on both, as well. Let me know when you receive it and we can talk about options. Thanks -=Joe
I got the first here now. So I’m interested in options so that I can keep it or deciding that the other would be worth the additional investment. since it would be about 150-200 price difference in with shipping. Thanks Joe
I am looking into getting new tuners on my husbands 12 string Acustic plus new strings..What would the cost on that be?
Hi Sue,
Upgrade quality tuners for a 12-string range from about $99-$300. The $99 set is actually very good. String sets are $9.99. Depending on what kind of tuners are on it now, the labor would run between $49-$79 for everything. Let me know if you’re interested and thanks for calling on me.
-=Joe
Joe Riggio Service Guitar Repair http://www.ServiceGuitarRepair.com